VENTO EXPERT A100 wall ventilator with heat and energy recovery from BLAUBERG is an indoor ventilation system without the need for ducts. Ensures the supply of clean fresh air, with air being alternately extracted and supplied, while at the same time preserving the heat of the room, thanks to its ceramic exchanger with an efficiency of up to 87%, due to its innovative six-cell structure. In addition, there is the ability for Wi-Fi communication between several single room ventilation units for coordinated operation.Controlled by Android or iOS smartphone or tablet.
Features:
- Energy class Α.
- Air flow up to 108m3/h.
- Built-in filters with class G3 to clean supply and extract air flows, washable and easily removable.
- Low Power Consumption from 1,80W.
- Control via remote control.
- It does not require condensate drainage.
- Reducing the cost of heating in winter and cooling in summer.
- Two unit speeds
- Protect against outdoor noise.
- Prevent penetration of excessive humidity and appearance of mould.
- The motor has overheating protection and bearings for longer life.
- The air duct can be extended by a pipe of the same diameter at a distance of up to 3m.
- Suitable for replacing an existing fan with minimal intervention.
Remote control for the models VENTO EXPERT A50 S10 W V.3 & Α100 S10 W V.2
Product cutting VENTO EXPERT A50 S10 W V.3 & Α100 S10 W V.2
Operation logic - 2 Cycles:
1st Phase (Air Extract)
- The ventilation unit exhausts the indoor air with the help of a fan, which passes the air through the heat exchanger for 70 seconds.
- The exchanger (ceramic element) stores the heat of its exhaust air so that it is available in the next phase.
2nd Phase (Air Supply)
- Once the 70 seconds are up, the system changes the direction of rotation of the fan, which now introduces fresh air from the environment into the interior.
- The incoming air passes through the exchanger where it absorbs (recovers) the stored, from the 1st phase, heat.
- Thus the fresh air is introduced into the interior, preheated and clean.
- Thanks to the filters the incoming air is free of dust, viruses, pollen and suspended particles.
- As soon as the 70 seconds of the second phase are completed, the system continues its operation, constantly repeating the cycle described above.
- This ensures the continuous renewal of quality air to the interior space, maintaining its thermal comfort.
Technical Characteristics:
| |
VENTO EXPERT A30 S 10
|
VENTO EXPERT A50-1 S10
|
VENTO EXPERT A100-1 S 10
|
|
Air flow in ventilation mode 1st - 2nd - 3rd - ΜΑΧ speed m3/h
|
10 - 20 - 30
|
15 - 30 - 50
|
18 - 30 - 58 -108
|
|
Air flow in heat recovery mode 1st - 2nd - 3rd - ΜΑΧ speed m3/h
|
5 - 10 - 15 |
7,5 – 17,5 - 25 |
9 - 15 - 29 - 54 |
|
Ceramic heat exchanger efficiency
|
Up to 81%
|
Up to 95%
|
Up to 87%
|
|
Noise at 1st - 2nd - 3rd - ΜΑΧ speed (3m) according to ISO 3741: 2004 dB(A)
|
21 - 28 -31
|
4 - 16 - 28
|
13 - 18 - 30 - 42
|
|
Noise at 1st - 2nd - 3rd - ΜΑΧ speed (1m) according to ISO 3741: 2004 dB(A)
|
30 - 37 - 40
|
13 - 25 - 37
|
23 - 27 - 40 - 51
|
|
Transported air temperature °C
|
-15.. + 40
|
-20.. + 40
|
-20.. + 40
|
|
Energy consumption (1st - 2nd - 3rd - ΜΑΧ speed) W
|
1,80 - 3,00 - 4,40
|
5,00 - 6,00 - 8,50
|
3,20 – 4,00 – 6,60 – 18,00
|
|
Included filters
|
2
|
|
Class Filter
|
ΕΝ 779 G3
|
|
Energy class
|
A
|
|
Power supply Vac
|
100-240
|
|
Ingress protection rating
|
ΙΡ24
|
|
Diameter
|
Φ104
|
Φ160
|
Φ160
|
Total dimensions [mm]:
